How to set up and use your wireless microphone
In addition to receiving the direct wave of the transmitted signal, the
antenna also receives an indirect wave reflected by the surrounding environment.
When the two phases are opposite, the signal intensities cancel each other out
and the on-line signal strength of the day is low At the mute point of the
receiver, a so-called "receive dead angle" occurs. As a result, the receiver's
output shows a transient burst or noise. The closer the signal is to the mute
point, the greater the noise.
General Wireless microphone manufacturers have adopted a simple single-antenna "non-diversity" (Non-Diversity) receiver circuit to reduce manufacturing costs, low-cost sales in the market. This kind of "non-automatic selection" receiver is troubled by the fact that the environment is complicated or the reception is farther away. Therefore, in order to ensure a perfect place for the places where the audio and the professional audio are emphasized Sound quality, the best choice of "automatic news" models. Although Auto Select is a more expensive model, it is the only choice to meet the quality requirements of wireless microphone to avoid broken sound and noise.
BY-WM6 UHF Wireless Microphone System
The BY-WM6 UHF Wireless Microphone System features a bodypack transmitter, a camera-mount receiver, and an omnidirectional lavalier microphone. The receiver is built with mic and headphone output jacks. The bodypack transmitter includes a MIC jack and LINE IN jack.
If you need to use multiple wireless systems simultaneously and need to
move from one location to another, it is more convenient to install the receiver
in a rack. But this will degrade the performance of the wireless system because
the antennas are too close to each other.
Wireless microphone hit the dead end during use (that is, the signal sometimes can not be received somewhere in a field, and sometimes the hand-held microphone, the person did not move around but the body slightly shaking the signal may sometimes not) This kind of thing is indeed more headache, for the average user, but also always think that the quality of wireless microphones, in fact, there are several reasons:
First, there are real sources of interference in some venues. Nowadays, communication tools are developed and diverse. For example, mobile phones, walkie-talkies, cordless phones and the like are interfered with each other. And there are metal equipment in the venue, and the reflection of the glass This happens.
BY-DMR7 Shotgun Microphone with Integrated Flash Recorder
BY-VM190 Shotgun Microphone
BY-V01 Condenser Microphone
BY-V02 Stereo Condenser Microphone
Lavalier microphone
BY-LM20 Omni Directional Condenser Microphone
BY-M4C Lavalier Microphone
ENG/broadcast microphone
Conference microphone system
General Wireless microphone manufacturers have adopted a simple single-antenna "non-diversity" (Non-Diversity) receiver circuit to reduce manufacturing costs, low-cost sales in the market. This kind of "non-automatic selection" receiver is troubled by the fact that the environment is complicated or the reception is farther away. Therefore, in order to ensure a perfect place for the places where the audio and the professional audio are emphasized Sound quality, the best choice of "automatic news" models. Although Auto Select is a more expensive model, it is the only choice to meet the quality requirements of wireless microphone to avoid broken sound and noise.
BY-WM6 UHF Wireless Microphone System
The BY-WM6 UHF Wireless Microphone System features a bodypack transmitter, a camera-mount receiver, and an omnidirectional lavalier microphone. The receiver is built with mic and headphone output jacks. The bodypack transmitter includes a MIC jack and LINE IN jack.
UHF wireless microphone |
Wireless microphone hit the dead end during use (that is, the signal sometimes can not be received somewhere in a field, and sometimes the hand-held microphone, the person did not move around but the body slightly shaking the signal may sometimes not) This kind of thing is indeed more headache, for the average user, but also always think that the quality of wireless microphones, in fact, there are several reasons:
First, there are real sources of interference in some venues. Nowadays, communication tools are developed and diverse. For example, mobile phones, walkie-talkies, cordless phones and the like are interfered with each other. And there are metal equipment in the venue, and the reflection of the glass This happens.
BY-DMR7 Shotgun Microphone with Integrated Flash Recorder
BY-VM190 Shotgun Microphone
BY-V01 Condenser Microphone
BY-V02 Stereo Condenser Microphone
Lavalier microphone
BY-LM20 Omni Directional Condenser Microphone
BY-M4C Lavalier Microphone
ENG/broadcast microphone
Conference microphone system
评论
发表评论