what wireless microphone for iphone video recording best

  Conventional wired microphones convert sound into an electrical audio signal that is sent to the sound system through a cable. Live music stages that are crowded with cables from microphones for vocals, guitars, drums and other instruments can become a snake pit of overlapping wires and limit the performers‘ freedom of movement on the stage.

  How to choose your microphone for recording

  Your budget. As always, this will determine which price point you’ll be looking at. If you want one of the best models out there, it’ll be around a few hundred bucks, otherwise there are some decent quality mics for under hundred in this list as well.

  What type of mic make? There’s X-Y, mid-side, even a bit bigger and just a larger diaphragm condenser mic. There are benefits to all of these, but a majority of the popular iOS mic models are X-Y since it allows for a large pickup, as well as gives you the ability to manipulate the directions of the mic depending on if you’re recording video alongside the audio or not.

  Additional accessories. Some come with a carrying case and others will merely fit in your pocket. The more expensive mics come with a bundle of additional accessories, such as converters, wind screens, etc. It can quite possibly save you some money, or for others may be too excessive.

  Wireless microphone systems convert audio signals created by microphones into radio signals, which are sent by a transmitter through the air to the receiver and then through the sound system. They eliminate the need for cables, so you are no longer tethered to a sound system or tripping through messy performing environments.

  With continuous advances and improvements in sound quality and reliability, wireless microphone systems are more affordable and popular than ever. Their potential goes far beyond the stage. You can find wireless microphone systems in exercise studios, schools, houses of worship, presentation halls – anywhere a performer or presenter wants true freedom of movement.

  Which components do you need to use a wireless microphone?

  The BOYA BY-WM6 is a UHF wireless system designed to work with DSLR camera, Camcorder, PC and more.

  The BY-WM6 system features a bodypack transmitter, a camera-mount receiver, and an omnidirectional lavalier microphone. The receiver is built with mic and headphone output jacks. The bodypack transmitter includes a MIC jack and LINE IN jack.

  • RF Modulation: GFSK (Gauss frequency Shift Keying)
  • Carries frequency range: 576MHz-599MHz
  • Frequency response: 60Hz-15KHz±3dB
  • Signal/Noise: 74dB or more
  • Distortion: 0.1% or less (32Ω,1 KHz,65mW output)
  • RF output level:2 mW
  • Earphone output level: 32Ω,65mW
  • Reception sensitivity: -30dB +/- 3dB / 0dB=1V/Pa, 1kHz
  • Audio input connector: 3.5mm mini jack
  • Operation range: 100m (300’)
  • Power requirements: Two (2) AA batteries

  • Consumption power: Transmitter: 2x1.5V/120 mA

  A wireless microphone system basically features two components:




How to connect wireless microphone to pc ?

What does a shotgun microphone do

How to make a wireless microphone at home