BOYA BY-MA2 Dual channel XLR audio mixer for DSLRs & camcorders


The BOYA BY-MA2 is a 2-channels XLR audio mixer which is designed for DSLRs, camcorders and other devices which has 3.5mm TRS audio jack. BY-MA2 has 2 XLR audio inputs that allow 2 external XLR wireless microphone receivers or XLR shotgun microphones to be used on it. With BY-MA2,it can help to improve the build-in sound performance and audio quality on camcorders or DSLRs.
BY-MA2 also comes with built in combo 6.35mm jack which allows for instrument inputs such as guitar or other instruments that has 6.35mm output jack.
BOYA BY-MA2 Dual channel XLR audio mixer for DSLRs


Built in with a standard 19mm bolt rod, BY-MA2 can be easily attached on any camera cages that with a 19mm rod.Meanwhile a 15mm bolt rod adapter is included which allows it to be compatible with any cages with a 15mm rod. At the bottom, it has 3 standard 1/4”-20 female threads that enable this audio mixer be able to connect to any camera cages(with 1/4 accessory holes) via a 1/4”-20 screw, or it can be located on the hot-shoe of DSLR cameras directly after the included cold-shoe mount adapter is well installed.


Product Highlights:

• 19mm bold rod
   Attach the mixer on any
  19mm camera baseplate rod
• 15mm rod tube adapter
   Attach the mixer on any
    15mm camera baseplate rod
• XLR1/ MIX / XLR2 switches
• Cold shoe mount adapter
• Passive operation
• Die cast aluminum chassis


more information you can visit boya wireless microphone factory.or email us:info@boya-mic.com

评论

发表评论

此博客中的热门博文

How to set up and use your wireless microphone

图片
　　In addition to receiving the direct wave of the transmitted signal, the antenna also receives an indirect wave reflected by the surrounding environment. When the two phases are opposite, the signal intensities cancel each other out and the on-line signal strength of the day is low At the mute point of the receiver, a so-called "receive dead angle" occurs. As a result, the receiver's output shows a transient burst or noise. The closer the signal is to the mute point, the greater the noise. 　　General Wireless microphone manufacturers have adopted a simple single-antenna "non-diversity" (Non-Diversity) receiver circuit to reduce manufacturing costs, low-cost sales in the market. This kind of "non-automatic selection" receiver is troubled by the fact that the environment is complicated or the reception is farther away. Therefore, in order to ensure a perfect place for the places where the audio and the professional audio are emphasized Sound
阅读全文

What is the best condenser microphone ?

图片
　　When you're choosing the best microphones to use both live and in your home studio, you'll commonly come across two different types: dynamic and condenser. Take a look at both of these microphones to learn about their advantages and disadvantages. 　　 ABOUT CONDENSER MICROPHONES 　　Condenser microphones are most commonly found in studios. They have a much greater frequency response and transient response, which is the ability to reproduce the "speed" of an instrument or voice. 　　They also generally have a louder output but are much more sensitive to loud sounds. 　　Condenser microphones are generally much more expensive than dynamic microphones, but many less expensive condensers are made. The problem is that most of these less expensive mics come from a couple of factories in China, and they all sound the same--very brittle and with little low end. 　　Condenser mics require the use of a power supply, generally 48-volt "phantom power," a
阅读全文